In this segment, we are going to create a “Raspberry Pi Video Looper” Easy Installation Guide
Raspberry Pi, a popular single-board computer, can be a versatile tool for various projects. One such project is using a Raspberry Pi as a USB Video Looper, allowing you to play videos in a loop from a connected USB storage device. In this tutorial, we will explore how to set up a Raspberry Pi as a USB Video Looper.Read Full Article
Step 1: Setting up the Raspberry Pi
Step 2: Connecting the USB Storage Device
Connect the USB storage device that contains your video files to one of the USB ports on the Raspberry Pi. You need to ensure that the USB device is properly recognized and mounted.
The USB hard disk should be formatted with FAT32, ExFAT, or NTFS
Step 3: Starting the Video Looper
To start the video looper, you need to turn on the Pi with an SD card inserted and plug in the flash drive with 1080p videos.
That’s it no other complex configuration is required. The software will automatically scan the video and begin playing the videos in a loop.
Sit back and enjoy the seamless video playback.
You can experiment with different video files, and unleash the full potential of your Raspberry Pi as a USB Video Looper. We hope this tutorial helps you to start your video looping project with a Raspberry Pi. If you have any questions or feedback, feel free to leave a comment below.
Did you find us helpful?
Please support us on Patreon, Follow us on Facebook